US Water Carbon Block Filter 2.5 inch x 10 inch – 10 Micron Filter
- NSF/ANSI 42 Certified to reduce chlorine, taste, odor, and sediment
- Standard sizing. Designed to fit most 10” filter housings.
- Made in the US.
- This filter element is rated at 10 microns.
- Elements are finished with a single layer of spun-bonded polypropylene netting.
- Polypropylene end caps with compression gaskets are standard.
Specifications
- Micron Rating: 10 Micron
- Dimensions: 2.5 O.D. x 1.25 I.D. x 10″ L
- Chlorine Reduction (greater than 95%): 8,000 Gallons @ 1 GPM
- Carbon Type: Coconut Shell Carbon
- Operating Temperature: 40 to 125 Degrees F
- Operating Pressure: 250 psi
- Case Quantity: 20
Replaces The Following
- American Plumber 155634-51, 555531-43
- AO Smith AO-WH-PRE-RC2
- Apex RF-1010
- Aquaboon AB-1C5M
- Aqua-Pure AP117
- Aries CB-10-6310-TO
- CA Ware CBC-10
- Cornelius COR10B1, COR10B5
- Dupont DWC30001, PFC8002, WFDWC30001, WFPFC8002, WFPFC9001
- EcoLab 9320-1002
- Everpure EV910916, CG5-10, DEV9108-15
- Express Water ACB, FLTCAR0502C
- Fibredyne CFB-10, 255671-43
- Flotec TO1
- GE FX12P, FXWTC
- GE Water GXWH20F
- Hydronix CB-25-1010
- Hydro Guard HDG-P117
- KX Industries 32-250-125-975
- Neo-Pure CT01-2510
- NuCalgon 4711-87
- OmniFilter TO-1, TO1, TO1-D, TO1-DS, TO1-S, TO1-SS, TO1-SS24-01, TO1-SS24-02, TO1-SS24-05, TO1D, TO1DS, TO1S, TO1SS
- Omnipure OMB-934-5M
- Optipure CTO-10
- Pentair DEV9108-15
- Pentek EPM-10, EP-10, 155634, 155634-43, 155531-03, 155531-43, C1, CEP-10E, EP-10, EP10-10WF
- Puretek FLTR-2112
- Puremark PFS10B1, PFS10B5
- Sears 34370
- Selecto 101-200
- Shurflo 15-056-10
- SpiroPure SP-EP-10
- Teledyne Waterpik IR-40
- True Value 583-377
- Watts F109009
- Whirlpool WHEF-WHWC, WHKF-WHWC
NOTE: Some of the above filters use Granular Activated Carbon (GAC) while ours use GAC Carbon Block Technology. We believe that it is a superior technology over GAC and has vastly superior chemical removal capacities. Also, there are made in the USA, unlike many of the above filters.
