
Hytrex cartridge filters are made from thermally welded blown microfibers of polypropylene. These microfibers create a strong, secure cartridge that captures particles throughout the entire filter depth. This translates to longer life and fewer change-outs than existing string-wound or resin-bonded filters. Hytrex’s true-graded density filter matrix combines efficiency, long life and purity to create a high performance depth filter. The purity and reliability of Hytrex cartridge filters ensure consistent results, time after time.
| Product Details | |
|---|---|
|
Max Pressure (Psi) |
35 |
|
Max Temp (°F) |
160 |
|
Micron Rating (Nominal) |
30 µm |
|
Psid@Flow Rate |
0.60 psid @ 5 GPM (Data based on 10″ length filter) |
|
Series |
Hytrex |
|
Cap Material |
Polypropylene |
|
Cartridge Style |
Drop-in |
|
Contaminants Reduced |
Sediment/Dirt/Rust |
|
Diameter |
2-1/2″ |
|
End Cap Type |
Self-Seal Spring |
|
Filter Construction |
Melt Blown |
|
Filter Type |
Sediment Depth |
|
Inner Diameter |
1″ |
|
Media Type |
Polypropylene |
|
Micron Rating |
30 µm |
|
Origin |
U.S.A. |
| Warranty & Certifications | |
|
Product Certification Standard |
NSF/ANSI 42 |
| Product Weight & Dimensions | |
|
Product Length |
40″ |
|
Product Weight (lbs) |
2.05 |
| Product Details | |
|---|---|
|
Max Pressure (Psi) |
35 |
|
Max Temp (°F) |
160 |
|
Micron Rating (Nominal) |
30 µm |
|
Psid@Flow Rate |
0.60 psid @ 5 GPM (Data based on 10″ length filter) |
|
Series |
Hytrex |
|
Cap Material |
Polypropylene |
|
Cartridge Style |
Drop-in |
|
Contaminants Reduced |
Sediment/Dirt/Rust |
|
Diameter |
2-1/2″ |
|
End Cap Type |
Self-Seal Spring |
|
Filter Construction |
Melt Blown |
|
Filter Type |
Sediment Depth |
|
Inner Diameter |
1″ |
|
Media Type |
Polypropylene |
|
Micron Rating |
30 µm |
|
Origin |
U.S.A. |
| Warranty & Certifications | |
|
Product Certification Standard |
NSF/ANSI 42 |
| Product Weight & Dimensions | |
|
Product Length |
40″ |
|
Product Weight (lbs) |
41 |