FreshPoint 61788-01 U440 Ultrafiltration System w/ Electronic Metered Controller

• Removes turbidity, cysts, and other particles down to 0.025 micron in size
• Multi-bore membrane structure combines seven single capillaries into one resistant structure to maximize membrane integrity virtually eliminating the potential for fiber breakage
• Requires only normal line pressure to operate
• Protects during power outages or intermittent power
• Retains natural mineral content of the water
• High surface area and tolerance to plugging
• Low pressure drop / High flow rates
• Forward-flush and back-flushing can provide extended filter life in a wide range of applications

Features:

• Metered self-cleaning cycle flushes only when needed, using less than 7 gallons per flush cycle
• Day override feature module daily with fresh water when system is not in use
• Suitable for indoor or outdoor applications
• All parameters are adjusted via timer programming and can be modified at any time
• Regeneration lockout input is available
• 9V battery backup maintains time of day
• Diagnostic display for Totalized Flow, Instantaneous Flow Rate, Days Since Last Flush, Prior Service Volume, Previous Days Water Usage
• Programmable auxiliary relay

NOTE: We recommend installing a step down sediment before the FreshPoint System, such as the 140 mesh Rusco Sediment or Sand Trapper filter followed by a 5 micron 20″ BB pleated or graded density filter . Filtering out larger sediment and particulates prior to the Ultrafiltration membrane extends the life of Hollow Fiber Membrane (UF) and conserves water with reduced flush cycles.