T Fittings Sold Separately: See Accessories Section Below
Measure the tap water coming in vs. the purified water going out of your reverse osmosis system.
Features:
- Displays TDS levels of the feed water and product water with in & out electrode probes.
- Highly efficient and accurate due to its advanced microprocessor technology.
- Auto-Off function conserves battery power. The unit shuts off automatically after 10 minutes of non-use.
- Dual Range 0-9990 ppm (From 0 – 999 ppm the resolution is 1 ppm. From 1000 to 9990 ppm, the resolution is 10 ppm, indicated by a blinking ‘x10’ image.)
- Factory Calibrated: our meters are calibrated with a 342 ppm NaCl solution. Meters can be recalibrated with a mini-screwdriver.
- Installs quickly and easily.
Specifications:
- Range: 0-9990 ppm
- Accuracy: ±2%
- Cable Length: 24.5″ (including sensor)
- Fittings are not supplied with this item. Probes are 1/4″ OD for use in 1/4″ quick-connect fittings. See accessories section below.
- Power source: 2 x 1.5V button cell batteries (included)
- Battery life: approx. 1000 hours of continuous use
- Size: 7.6 x 2 x 4.7 cm (3 x .8 x 1.9 in.)
- Weight: 79.4 g (2.8 oz.)
View a diagram of the monitor installed on an RO System
