External Flow Control – 900ml/min for 100 gpd

Flow Controls (aka Flow Restrictors) are required for all RO systems and must be properly sized to the membrane capacity, typically 3-4 parts brine (drain water) to 1 part permeate (product water). The FR-900-JG is simple to install – just push the 1/4″ tube firmly into the quick connectors.
Specifications:

• 1/4″ QC x 1/4″ QC
• Quick and easy installation
• RO Membrane Flow Rate: 100 GPD
• Drain Flow Rate: 900 ml/min
• Rinse Ratio: approximately 3.4:1 (drain:RO)

NOTE: To optimize the efficiency and performance of the RO system, we recommend the installation of a Permeate Pump.