SUCTION5 – 5 inch Gray Suction Cover – needs 2 side screws
This part does not include screws: you will need two.
Dimensions:
Outside Diameter: 5.1875 inches (13.17625 cm)
Inside Diameter: 4.90625 inches (12.461875 cm)
Height: 1.25 inches (3.175 cm)
Weight: 4.0 oz. (115 g)
Beveled: Beveled on sides
Attaches by 2 (side) screws (not included)
Cover Diameter: 5-3/16 inches
Suction Fitting Part Type: Cover
Color: Gray
Wall Flow Rate: Wall only: 180 gpm submerged, 232 gpm submerged with vacuum break
Manufacturer: Waterway
Listed 2K39
Notes: We recommend that you use the original screw from your spa when replacing the suction cover.
These are not Original Manufacturer’s Replacement Parts designed specifically for Master Spas Tubs.
They are not guaranteed to work for all replacement applications.
Check your current covers first to see if these will work for your tub.
Very similar to part included with:
X804664 – 2.5 inch Super Hi-Flow DSG VGB Suction Wallfitting Assembly
VGB is a term referring to compliance with Federal Law:
Virginia Graeme Baker Pool and Spa Safety Act
