Omnipure – K5640 – 12″ x 2.5″ T40 GAC Coconut Carbon Inline Filter

FEATURES & BENEFITS

• Fine filtration of treated drinking water to ingredient water quality
• Helps standardize beverage quality at disparate locations
• Reduces maintenance problems in water-using equipment
• Removes more than 95% of disinfectant chlorine
• Takes out common earthy, fishy, musty tastes and odors
• Filters out fine particulates, including dirt, rust, oxidized iron manganese and sulfide
• Tested and Certified by NSF International against ANSI/NSF Standard 42 for Taste and Odor Reduction and Chlorine Reduction

SPECIFICATIONS

• Dimensions: 2.5″ x 12″
• Capacity: 2,500 Gallons
• Media: Acid Washed 12 x 40 Mesh Carbon Coconut
• Maximum Pressure: 125 PSI
• Temperature: 30-100°F (2-38°C)
• Service Flow Rate: 0.5 GPM (1.9 LPM)
• Threaded fittings must be wrapped with Teflon tape before installation
• Install Teflon taped fittings and tighten firmly
• Flush new cartridge with 5 gallons of water prior to use and check for leaks.
• Replace cartridge when rated capacity is reached, or when flow becomes too slow
• Install in compliance with state and local laws and regulations
• Case Quantity: 25 Pieces (Pricing is per piece)

TYPICAL APPLICATIONS

• Pre-filtration for RO
• Drinking fountains
• Ice Machines
• Other point-of-use applications

**Interchangeable carbon with T28, T33 and T40 models.

*NOTE: A very common misconception is that a 1/4″ NPT measures as 1/4 inch on a ruler or tape measurer. However, that is not the case. NPT will measure larger in diameter. Above is a sizing reference to help clarify.